Power Options

Attention: open in a new window.

There are basically two ways the Autocom systems can be powered... 9volt or 12volt. The Easi-PLUS and Active-PLUS can both be powered portably using a standard 9volt battery, or alternatively connected to the bike's 12volt power.

The Autocom Easi-PLUS system comes out-of-the-box ready to run on a 9volt battery. Depending on the age and condition of the battery, the Easi-PLUS will run from14 hours to 25+ hours. Alterantively, the Easi-PLUS can be connected to your bike's battery using a 9volt-to-12volt power lead.

The Active-PLUS system (Active Rider Kit) comes with both a 9volt battery connector and a 12volt bike power lead (Part 1536).

The Super Pro AVi system is 12volt power ONLY, and this unit comes with the necessary 12volt power lead.

For further details on Power Leads from Autoom, please download the Bike Power Leads manual:

Bike Power Instructions

Please also refer to the FAQ (How to power Autocom Systems) page for further information on Power Leads.

There are a variety of replacement or optional power leads available:

Easi-PLUS Power Lead

(Part: 1533)

12-volt Power Lead

(Part: 1536)

The Easi-PLUS Power Lead converts 12volt power from your bike to 9volt to power the Easi-PLUS

(Also compatible with previous Easi-Series)

Optional power lead. This lead replaces the 9volt battery connector/lead which is removed and replaced with the shown connector. The twin lead is connected to the Bike's 12volt source as per instructions.

For use with Pro M1, Pro-7, Active-7, Active-PLUS and Super Pro AVi

Pro/Active Series Detachable Power Leads

The Detachable Power Leads allows Autocom units to be carried in tank bags or panniers, and to be disconnected quickly and easily at the end of the day.

These leads must be used together. For use with Active-PLUS, Super Pro Avi, Pro-7, Pro M1

Part 1537

Part 1538

Part 1537 contains a white straight pin socket which connects into the Autocom unit

Part 1538 has a twin core cable which is powered from a 12volt source, and at the other end a female 5-pin DIN plug which connects to the male plug on

Direct Battery Connection Power Lead

Direct battery connection with fused relay for switched ignition remote control. Used to control noisy electrical power supply. For use with any bike powered Autocom system